某工廠綜合樓結構設計

土木工程論文編號:TM074   論文字數:16317,頁數:106  附開題報告，文獻綜述，外文翻譯，CAD圖

目錄
中文摘要 ⅰ
英文摘要 ⅱ
1 緒論 1
1.1　工程概況 1
1.2　屋面做法 1
1.3　樓面做法 1
1.4　地面做法 2
1.5 墻面做法 2
1.6　設計資料 3
2 框架結構設計及布置簡圖 4
2.1 結構承重方案的選擇 4
2.2 主要構件選型及尺寸初步估算 4
2.3 結構計算簡圖 7
3 樓蓋設計 10
3.1 設計資料（以第二層樓蓋為例） 10
3.2 樓蓋結構平面布置圖（以第二層樓蓋為例） 10
3.3 板的設計 11
4 屋蓋設計 17
4.1 設計資料 17
4.2 樓蓋結構平面布置圖 17
4.3 屋面板的設計 18
5 恒荷載內力計算 24
5.1 恒荷載計算 24
5.2 恒荷載下固端彎矩計算 32
5.3 框架恒載下的彎矩計算 35

5.4 框架恒載下剪力軸力計算 47
6 活荷載內力計算 51
6.1 活荷載計算 51
6.2 活荷載下固端彎矩計算 54
6.3 活荷載下彎矩計算 56
6.4 活荷載下剪力軸力計算 61
7 風荷載內力計算 65
7.1 風荷載計算 65
7.2 風荷載內力計算 67
7.3 各柱反彎點高度計算 72
7.4 右風荷載作用下內力計算 73
8 內力組合 66
9 截面設計 78
9.1 梁截面設計 78
9.2 柱截面設計 80
10 基礎設計 85
10.1 荷載計算 85
10.2 單樁豎向承載力特征值及樁長計算 86
10.3 單樁受力驗算 87
10.4  承臺計算 88
11 樓梯設計 89
11.1 基本資料 89
11.2 梯段板設計 89
11.3 平臺板設計 91
11.4 平臺梁設計 92
結束語 98
致 謝 99
參考文獻 100

 摘 要
 
 本次畢業設計為某工廠綜合樓結構設計，根據建筑設計、工藝使用、抗震要求、施工技術、場地條件等確定合理的結構方案和結構布置方案，確定主梁、次梁、樓面、屋面、樓梯及其他承重構件和非承重構件形式。
 結構設計大體分為三個階段：
 結構方案階段：根據建筑物的重要性，抗震設防烈度，建筑場地類別，建筑層數和高度等確定建筑結構形式。本工程可采用框架結構。
 結構計算階段：包括荷載計算，內力計算和構件計算。
 施工圖設計階段：根據上述計算結果確定構件布置和構件配筋以及根據規范要求來確定結構構件的構造措施。

關鍵詞：框架；結構設計；荷載計算；構件配筋

The structural design of a factory’s comprehensive building

Abstract

 This graduation designed a factory comprehensive building structure design, The structural design according to the requirements of the design of the building, technics use, anti-vibration, the supply of the spotting material, the ability of construction, the conditions of the spotting land quality and so on, we can ascertain the reasonable plan of the structure and the structure collocation. Meanwhile, we can make sure the forms of the bearing components and non-bearing components, such as main beam, piece beam, floor, house, stairs, and so on.
 The stage of the structural design can be divided into three stages on the whole:
 1. Structural scheme stage: According to the importance of the building, providing fortification against earthquakes in the earthquake intensity, the geologic prospect report of the project of the building site, classification and height and storey of the building of the building field are counted to confirm the structural form of architecture, what this project is adopted is frame structure.
 2. Calculate stage in structure: Including loading and calculating, the internal force is calculated and calculated with the component.
 3. Construction drawings design phase: According to described above result of calculation, come, confirm component assign with component mixing muscling and coming, confirming structural structure measuring of component according to the request of norm finally.
Keywords：Frames; Structural design; Load and calculate;
  Component reinforcement