連續梁橋施工臨時結構設計

摘  要
 掛籃作為懸臂灌筑施工的主要設備已有許多類型，有些國家如日本、法國等已有定型的系列化產品。我國從上世紀80年代開始使用這種技術以來，也已取得了巨大的成就。隨著我國現代化進程的加快，基礎設施的建設飛速發展。高速公路、橋梁、隧道等基礎設施規模在不斷向大型化、大跨度方向發展。目前大型、大跨度橋梁的施工廣泛采用環境適應性強的懸臂澆筑法。掛籃設備是進行懸臂澆筑施工時必不可少的施工機具，其中菱形掛籃設備在大型橋梁施工中得到廣泛應用。我國的掛籃設計制作已全部適應懸臂施工的高強、輕型、大跨發展的需要，從PC連續梁或鋼構的懸臂施工掛籃最初是平行桁架式，后來逐漸發展為多樣化，結構越來越輕型，受力越來越合理，施工越來越方便，應用也越來越廣泛。
 本設計采用菱形掛籃，重點了解掛籃的構造、設計方法及主要的分析計算步驟。其次，本設計主要是應用MIDAS/Civil及OutCAD對掛籃進行設計，需學習掌握MIDAS/Civil及OutCAD。
 掛籃是懸臂施工的關鍵設備，掛籃的主要功能是支撐模板，承受新澆混凝土重量。掛籃通常都由以下幾個部分組成：承重系統、懸吊系統、模板系統、錨固裝置、走行系統和工作平臺。
 掛籃的內模、外模、底模及主桁架計算是掛籃設計的主要組成部分，本文進行講解。從掛籃的受力計算開始分析，通過強度驗算、撓度檢算設計出最合適的掛籃截面尺寸，來滿足掛籃設計所要達到的要求。本設計中還有很多不足之處，望能提出寶貴意見，特此感謝。
關鍵詞：模板 主桁架  懸臂施工

Abstract
 Basket as cantilever construction of major equipment, there are many types, some countries such as Japan and France have finalized a series of products. 80 years from the last century, China began using this technique has also made great achievements. Highways, bridges, tunnels and other infrastructure continue to scale in large, long-span direction. At present large-scale, long-span bridge construction widely used in environmental adaptability of the cantilever casting method. Hanging Cantilever construction equipment is carried out when necessary construction machinery, including a large diamond-shaped hanging basket device widely used in bridge construction. Hanging Basket Design China have all been adapted cantilever construction of high-strength, lightweight, long-span development, from a PC or a steel cantilever beam was initially parallel to the truss construction Hanging type, then gradually developed into a diversified structure increasingly The more light, more and more reasonable force, the construction more convenient, more and more widely applied.
 This design uses Lozenge hanging basket, introduced the triangular cradle design principles, triangular cradle design, construction methods and the main calculation steps, described cantilever construction technique. The process of mapping and calculating the main use of MIDAS / Civil and OutCAD engineering software
 Hanging is the cantilever construction of key equipment, Cradle main function is to support the template, to bear the weight of fresh concrete. Hanging usually by the following components: load-bearing system, suspension system, template system, anchoring devices, running the system and working platform
 Hangs basket's cast, the outline templet, the bottom die and the principal truss computation is hangs the basket design the key component, this article carries on the explanation. From hangs basket's stress computation to start to analyze, through the intensity checking calculation, the amount of deflection examines calculated that designs appropriately hangs the basket section size, hangs the request which satisfiedly the basket design must achieve. In this design also has many deficiencies, looks can propose the valued suggestion, thanks specially.
Key word: Template  Principal truss  Bracket construction

目  錄
第1章 緒論 1
 1.1掛籃懸臂施工在國內、外發展現狀 1
 1.2 掛籃施工的工藝特點法 1
 1.2.1掛籃設計 2
 1.2.2掛籃制作 2
 1.2.3掛籃安裝 3
 1.2.4掛籃走行 3
 1.2.5掛籃拆除 3
第2章 工程概況 4
 2.1基本簡介 4
 2.2工程內容 4
 2.3工程項目 5
 2.4滬寧城際鐵路大橋橋體主要技術參數 5
第3章 模板設計 6
 3.1側模計算 6
 3.1.1側壓力計算 6
 3.1.2 面板計算 6
 3.1.3加勁肋計算 8
 3.2 底模計算 9
 3.2.1斜立側底模計算 9
 3.2.2梁底模板計算 10
 3..3翼緣板計算 10
 3.4頂板計算 11
 3.5內模計算 11
 3.5.1內模所受重力計算 11
 3.5.2走行梁驗算 12
 3.5.3吊梁驗算 12
 3.6外側模桁架檢算 13
第4章 主桁架計算 15
 4.1主橫梁的計算 15
 4.2 主桁架計算 16
 4.3 桿件連接處螺栓的確定 18
 4.4 作用在主橫梁上的吊帶計算 20
第5章 結束語 21
參考文獻 22
致  謝 23
附  錄 24