電梯拆裝實訓模型轎廂部分設計

機械論文編號:JX771  論文字?jǐn)?shù):7351.頁數:21   附CAD圖

目錄
中文摘要  i
英文摘要  ii
目    錄  iii

第一章  緒論 1
1.1 背景與意義 1
1.2市場上實驗電梯與本實驗電梯的現狀 2
1.2.1 市場上實驗電梯的現狀 2
1.2.2 市場以外的實驗電梯模型 3
1.3 研究的主要內容和解決的思路 4
第二章 電梯結構及實訓電梯的特點 6
第二章 電梯結構及實訓電梯的特點 6
2.1 電梯的構成及轎廂工作特點 6
2.2實訓電梯模型與市場上模型的對比 7
2.3 本章小結 8
第三章   電梯轎廂與轎門的設計 9
3.1 轎廂的設計 9
3.2 轎門的設計 11
3.3 導靴的設計 12
3.4 本章小結 13
第四章 結論 14
參考文獻 15

摘   要
 
 本文介紹了實訓可拆裝電梯轎廂與門系統的設計。轎廂和門系統是實訓可拆裝電梯模型的主要組成部分，其結構較復雜。
 轎廂要反復運動。轎廂的設計是可以拆裝的，簡單的說，轎廂是用結構鋼（角鋼和方鋼）搭積木似的疊起來的。將自己設計的電梯轎廂和門系統與市場上的教學電梯模型做了詳細的對比。本文詳細闡述了電梯的組成，轎廂的運動特性。并且詳細地說明了實訓電梯的轎廂和門系統的設計。論述了在設計過程當中遇到的問題。并且用proe三維造型畫出了電梯轎廂的現實模型。

關鍵詞：實訓電梯模型   可拆裝   轎廂   門系統
  The Desgin of Removable Elevator Model’s Lift Car and Door System
 Abstract
 This dissertation elaborates on the desgin of removable elevator model’s lift car and door system.The car and the door are the important parts of the elevator model,witch are complicated.
 The car need to move up and down frequently . The lift car could be removable, in brief ,the lift car is build up with structural steel (angle steel and square bar) witch is like building with blocks. This dissertation makes a detailed comparison of the desgined lift car and the lift car on the market. This paper describes the composition of the elevator and the car's moving character.And details the practical elevator model’car door system.Discusses some problems in the design process.And draws a three-dimensional elevator car modeling with Pro/e .

 Key words:  Elevator Model for Teaching purpose   Removable  Lift Car   Door System