基于Solidworks設計機械加工工序工藝圖

機械論文編號:JX055   附任務書,說明書,和所有圖片 論文字數:11306,頁數:30
目錄  
摘要……………………………………………………………………………………Ⅰ
Abstract  ………………………………………………………………………………Ⅱ
1  緒論  ………………………………………………………………………………1
1.1SolidWorks軟件的特點、應用與展望………………………………………1
1.1.1 Solidworks軟件的主要發展歷程……………………………………1
1.1.2 SolidWorks軟件的特點………………………………………………1
1.1.3 SolidWorks軟件的應用………………………………………………1
1.1.4發展前景 ………………………………………………………………2
1.2使用Solidworks設計的優勢 ………………………………………………2
1.2.1易用和友好的界面 ……………………………………………………2
1.2.2配置管理 ………………………………………………………………3
1.2.3裝配體設計建模 ………………………………………………………3
1.2.4工程圖 …………………………………………………………………3
1.2.5零件建模 ………………………………………………………………3
1.3Solidworks與CAD的比較……………………………………………………4
1.4應用Solidworks設計機械加工工序圖的目地與意義 ……………………4
2  后托架零件加工分析  ……………………………………………………………5
2.1零件的作用……………………………………………………………………5
2.1零件的工藝分析………………………………………………………………5
2.1 工藝規程設計   ………………………………………………………………5
3  撥叉零件加工分析 …………………………… …………………………………16
3.1零件的作用……………………………………………………………………16
3.2零件的工藝分析………………………………………………………………16
3.3工藝規程設計…………………………………………………………………16
4  機械加工工藝圖的制作   …………………………………………………………24
4.1零件的建模……………………………………………………………………24
4.2繪制各個加工工序中的零件圖………………………………………………25
4.3 Solidworks格式轉化成JPEG格式…………………………………………27
4.4工藝卡片的制作………………………………………………………………27
5  總結  ………………………………………………………………………………28
參考文獻 ………………………………………………………………………………29

摘要

  SolidWorks是一款簡單實用的三維軟件，SolidWorks創作過程包含三維與二維交替的過程，該軟件成功的處理了創作過程中存在多重關聯性，使得設計過程順暢、簡單及準確。常規工藝卡片的工序工藝圖一般為其幅面(通常為A4)的1/4或更小，以手工設計繪圖→描圖→曬圖，既費時費力又難以表達清楚，這一直是工藝工程制圖的一個棘手難題。本文找到了一種應用SolidWorks設計機械工序工藝圖的新方法，成功地解決了機械工序工藝圖繪制困難費時費力又難以表達清楚的問題,取得了很好的效果,各工序之間得到較好的貫穿，將整個工藝規程立體化。
   關鍵詞：Solidworks  工藝規程  工藝圖

   Based On Solidworks Design Machine-Finishing Working Procedure Craft chart
Abstract ：SolidWorks is a section simple practical three dimensional software, the SolidWorks creation process contains three dimensional and the two-dimensional in turn process, this software succeeds in the processing creation process has had the multiple connection, causes the design process smooth, simple and is accurate. Convention process chart working procedure craft chart usual for its width (usually is A4) 1/4 or is smaller, -exposes to the sun the chart by the manual design cartography - trace, both time-consuming takes the trouble and to express with difficulty clearly, this always is a craft project charting thorny difficult problem. This article found one kind to design the mechanical working procedure craft chart using SolidWorks the new method, successfully solved the mechanical working procedure craft chart plan difficult time-consuming to take the trouble to express the clear question with difficulty, has obtained the very good effect, between various working procedures obtained better passing through, was direct-viewing the entire technological process.
Key word: Solidworks  technological process craft   chart