皮帶機傳動系統

機械論文編號:JX285 所有圖紙,外文翻譯。論文字數:44443.頁數:94
目    錄
1 緒論.................................................................. 1
1.1斗輪堆取料機 .........................................................1
1.2斗輪堆取料機尾車 .....................................................3
1.2.1固定式單尾車....................................................... 3
1.2.2鋼繩卷揚驅動的活動式單尾車......................................... 4
1.2.3后部鉸軸俯仰液壓驅動活動單尾車 .....................................5
1.2.4中部鉸軸俯仰液壓驅動活動單尾車..................................... 5
1.2.5伸縮升降式雙尾車 ...................................................5
1.2.6 鋼繩卷揚驅動雙尾車 ................................................6
1.2.7液壓驅動雙尾車 .....................................................7
1.2.8 固定叉式漏斗雙尾車................................................ 7
1.2.9尾車機構的選擇..................................................... 8
1.3帶式輸送機的特點..................................................... 8
1.4帶式輸送機的工作原理和分類 ...........................................8
1.4.1帶式輸送機的工作原理............................................... 8
1.4.2帶式輸送機的分類................................................... 11
1.5帶式輸送機的摩擦傳動原理 .............................................13
1.5.1膠帶的摩擦傳動原理 .................................................13
1.5.2傳動裝置的牽引力 ...................................................15
1.6帶式輸送機的現狀與發展趨勢........................................... 15
1.6.1國外帶式輸送機技術的現狀........................................... 15
1.6.2. 國內帶式輸送機技術的現狀 .........................................16
1.6.3 國內外帶式輸送機技術的差距 ........................................17
1.6.4 煤礦帶式輸送機技術的發展趨勢 ......................................19
2 帶式輸送機的參數設計計算 ..............................................19
2.1帶速的確定 ...........................................................20
2.2核算輸送能力......................................................... 20
2.3根據原煤粒度核算輸送機帶寬 ...........................................20
2.4圓周驅動力的確定..................................................... 20
2.5輸送帶的選型......................................................... 23
2.6輸送帶的張力計算 .....................................................23
2.6.1輸送帶不打滑條件校核............................................... 23
2.6.2輸送帶下垂度校核................................................... 24
2.6.3各特性點張力計算 ...................................................24
2.6.4確定傳動滾筒合張力................................................. 25
2.7輸送帶的強度校核..................................................... 26
2.8拉緊行程的計算 .......................................................26
2.9各部件選型........................................................... 26
3 減速器的計算.......................................................... 27
3.1電動機選型 ...........................................................27
3.2傳動比分配........................................................... 27
3.3計算傳動裝置的運動和動力參數 .........................................28
3.4齒輪的設計及校核計算 .................................................29
3.4.1第一對齒輪的設計 ...................................................29
3.4.2 第二對齒輪的設計 ..................................................34
3.4.3 第三對齒輪的設計 ..................................................37
3.5傳動軸的設計......................................................... 40
3.5.1Ⅰ軸的設計 .........................................................40
3.5.2Ⅱ軸的設計......................................................... 44
3.5.3  Ⅲ軸的設計....................................................... 48
3.5.4  Ⅳ軸的設計....................................................... 52
3.5.4鍵的強度校核....................................................... 55
3.5.5軸承的校核......................................................... 56
3.6減速器箱體的結構設計 .................................................59
3.7 軸系部件的結構設計 ..................................................61
3.8 減速器的附件 ........................................................61
3.8.1 檢查孔與檢查孔蓋的設計............................................ 61
3.8.2 油標指示器........................................................ 62
3.8.3 定位銷............................................................ 63
3.8.4 啟蓋螺釘.......................................................... 63
4 帶式輸送機的操作、維護和安裝.......................................... 64
4.1啟動和停機........................................................... 64
4.2帶式輸送視的維護..................................................... 64
4.3皮帶打滑的解決辦法................................................... 67
4.3.1重錘張緊皮帶運輸機皮帶的打滑....................................... 67
4.3.2螺旋張緊或液壓張緊皮帶機的打滑..................................... 68
4.3.3其它............................................................... 68
4.4皮帶運輸機皮帶跑偏的調整 .............................................68
4.4.1 調整承載托輥組.................................................... 68
4.4.2安裝調心托輥組 .....................................................69
4.4.3調整驅動滾筒與改向滾筒位置 .........................................69
4.4.4張緊處的調整 .......................................................69
4.4.5 轉載點處落料位置對皮帶跑偏的影響 ..................................70
4.4.6雙向運行皮帶運輸機跑偏的調整 .......................................70
4.5皮帶運輸機的撒料的處理............................................... 70
4.5.1轉載點處的撒料..................................................... 71
4.5.2凹段皮帶懸空時的撒料 ...............................................71
4.5.3跑偏時的撒料 .......................................................71
4.6帶式輸送機的安裝 .....................................................71
5 其它形式的帶式輸送機 ..................................................72
5.1手造帶式輸送機 .......................................................72
5.2大傾角帶式輸送機 .....................................................73
參考文獻 ................................................................75
翻譯部分................................................................ 76
英文原文................................................................ 76
中文譯文：.............................................................. 84
致  謝...................................................................88

摘   要

     斗輪堆取料機是一種高效率的連續裝卸設備，被廣泛應用在火電廠、港口碼頭、鋼鐵冶金、礦山、建材水泥、化工、煤炭與焦化廠等原料儲運場，可實現煤炭、礦石、化工原料等散狀物料的堆取、轉運、裝卸的連續作業。
帶式輸送機是斗輪堆取料機中重要環節,在其它方面也廣泛應用。帶式輸送機是現代物料連續運輸?shù)闹匾�設備，是連續運動的無端輸送帶運送貨物的機械，用膠帶作為輸送帶的帶式輸送機稱為膠帶輸送機，簡稱膠帶機。它具有結構簡單、成本低、運輸距離長、效率高的優點。其主要用于冶金、采礦、煤炭、電站、港口以及工業企業。它將為我國各礦業裝卸工作的機械化、現代化作出越來越大的貢獻。
本文主要介紹了斗輪堆取料機中的運輸皮帶機。首先，介紹了帶式輸送機的工作特點、發展概況、工作原理，分類；其次，介紹了膠帶的摩擦傳動原理；最后，根據帶式輸送機的工作條件對其計算，其中對傳動部分的減速器部分進行了詳細的設計及設計計算，簡單分析了皮帶跑偏及撒料的原因和解決方法，又介紹了其他幾種形式的皮帶機。
關鍵詞：帶式輸送機；發展概況；減速器
 

Abstract

 Bucket Wheel Stacker and feeder is a highly efficient for handling equipment, is widely used in thermal power plants, port, iron and steel metallurgy, mining, cement building materials, chemicals, coal and coke plant, and other raw materials storage and transportation field, can be realized coal, ore , Chemical raw materials and other bulk material from the reactor, transit, handling of the continuum.
 Belt conveying systems is expected bucket Stacker and an important link in the machine, in other areas also widely used. Modern belt conveyor is an important material for transport equipment, is no reason for the movement of mechanical conveyor belt transporting goods, with the belt conveyor belt as a conveyor belt known as the conveyor belt, or tape machines. It is simple in structure, low cost, long distance transport, high efficiency advantages. Its mainly used for metallurgical, mining, coal, power plants, ports and industrial enterprises. It is China's handling of the mining mechanization and modernization of increasing the contribution.
 This paper presents a bucket Stacker and feeder in the transport belt machine. First of all, the work on the belt conveyor characteristics, Development, principle, classification and secondly, the friction on the tape drive principle; Finally, the working conditions under their belt conveyors, including the transmission of the slowdown Is part of a detailed design and design calculations, the simple analysis of the belt material deviation and spread the causes and solutions, has introduced several other forms of belt machine.
Key words: belt conveyors: Belt conveying systems ;Development survey; reduction gear