基于無線傳輸技術的室溫控制系統設計——溫度控制器軟件設計

電子機電論文編號:JD877  附開題報告,外文翻譯,論文字?jǐn)?shù):17219,頁數:37

目  錄
摘要 
1緒論  1
1.1溫度控制的發展及意義  1
1.2課題的背景   2
1.3本次設計的主要內容  2
1.4本論文的結構  3
2．系統原理的設計  4
2.1系統的工作原理  4
2.2 AD590工作原理  4
2.3 系統的組成框圖  4
3硬件部分的設計  5
3.1單片機的介紹  5
3.2芯片介紹  5
3.3溫度傳感器的選擇及基本工作原理  6
3.4主要接口電路  7
3.4.1顯示電路  7
3.4.2提醒電路  9
3.4.3紅外接收電路  10
3.4.4模數轉換電路  11
4軟件部分的設計  13
4.1KEIL C51編譯器介紹  13
4.1.11uVision2集成開發環境  13
4.1.2集成功能  13
4.1.3編輯器和調試器  13
4.1.4C51 編譯器  14
4.1.5測試程序  14
4.1.6常規控制規律  15
4.1.7通用代碼優化  16
4.1.8 8051特殊優化  16
4.2主要程序設計  16
4.3紅外解碼程序  18
4.4數據處理子程序設計  22
4.5顯示控制程序設計  23
4.6提醒電路程序的設計  25
5軟件調試  26
6結束語  27
參考文獻  28
致謝  29
附件  30

摘要：本文介紹了一種基于溫度采集芯片AD590，以單片機AT89S51為核心的溫度控制系統。系統具有溫度采集、溫度顯示、紅外接收遙控等功能。本系統主要包括硬件電路設計、功能實現軟件設計。可實現對溫度的測量，并能根據設定值對環境溫度進行調節，實現溫控。
硬件部分的設計主要的有：顯示電路的設計、報警電路的設計、紅外接收電路的設計和溫度控制電路的設計。
本設計主要是功能軟件系統的實現。主要內容是：紅外解碼程序的設計、數據處理子程序的設計、顯示控制程序的設計和提醒電路程序的設計。本設計中使用的調試平臺是keil公司的μVision調試器，調試器支持僅用PC或筆記本電腦進行模擬、以及利用目標系統和調試器接口來進行調試。
本設計基本完成了溫度采集，溫度控制及紅外接收的軟件設計。

關鍵詞：?jiǎn)纹瑱C(jī)；紅外控制器；AD590傳感器

 A temperature controlling system design based on wireless transmission technology---
Temperature controller designing sfeware
Abstract：In this paper,we introduced a temperature system a chip-based temperature acquisition AD590, a single-chip AT89S51 as the core. This system includes such functions as temperature acquisition, temperature display, infrared receiver remote control. The system includes the hardware circuit design, software design features. The measurement of temperature Can be achieved and the environment can be adjusted in accordance with the temperature settings .
The main parts of hardware design are: the design of display circuit, alarm circuit design, infrared receiver circuit design and temperature control circuit design.
This design is mainly the realization of the functional software system. The main contents are: the design of infrared decoding process, the design of data-processing routines to show the design of control procedures and to remind the circuit design process. Used in the design is debug platform of μVision debugger produced by company keil, The debugger supports only PC or notebook computer to simulate, and to adjust with the target system and debug interface for debugging.
The design completed software design of the temperature acquisition, temperature control and infrared receiver.

Key words: single-chip;controller infrared sensor;AD590