基于單片機的數字函數發生器的設計

電子機電論文編號:JD902     字數:8017,頁數:26

目錄
引 言 1
1 方案的認證與選擇 2
1.1 總體方案論證與選擇 2
2單片機系統工作原理 4
2.1 AT89C51部分 4
2.2 DAC0832部分 8
2.3 運算放大器部分 11
2.4 系統完整的電路 12
3 系統的軟件設計 13
3.1 主程序流程圖 13
3.2 讀寫AT89C51程序產生波形 13
3.3 DAC0832轉換信號 14
4 系統的電腦仿真 15
4.1系統的仿真波形圖 15
5電路的實物制作部分 16
5.1 電路的調試 16
5.2 焊接PCB板 16
5.3實物的測試以及部分參數的測定 17
小結 17
參考文獻 18
附錄 19
謝辭 23

摘要：本論文介紹了數字函數發生器的工作原理和硬件的設計以及系統的設計。硬件部分主要由AT89C51單片機、DAC0832數/模轉換器、放大器和其他輔助電路組成。系統的原理是：單片機通過程序讀取數據調出所要的波形代碼，經過DAC0832數/模轉換器將單片機輸出的數字信號轉換成為模擬信號后，再由放大器將信號放大輸出在示波器上顯示。軟件部分的編程語言采用了51單片機匯編語言。系統用比較簡單的硬件實現了數字函數信號的選擇輸出顯示功能。具有顯示波形清晰、穩定，可靠性高，原理簡單、使用簡單,一定的實用性等優點。
關鍵詞：數字函數發生器；DAC0832；51單片機；波形；示波器顯示

The design of the digital function generator based on single-chip
Abstract：The article introduce the working principle of digital function generator and the design of hardware and system .The part of hardware make up of AT89C51 single chip , DAC0832 D / A converters, amplifiers and other auxiliary circuit. The principle of the system are in this aspects: The single-chip transfer the waveform code by read the data through the procedure, and the DAC0832 D / A converter the digital signal into an analog signal from the output of the single-chip, then show the signal amplification in the oscilloscope from the amplifier output. The part of the software programming language used the 51 single-chip assembly language. The system implement the digital signal function of the choice of output display with relatively simple hardware, include the advantage of a clearly, stability, reliable waveform display with, simply, simply to use, a certain degree of practicality.
Key words: digital function generator; DAC0832; 51 single-chip; wave; oscilloscope display