水位控制器的設計

論文編號:ZD1463  論文字?jǐn)?shù):5650

摘要

 本設計的目的是為了讓水箱具有自動控制水位的能力。傳感器收集到信號后由放大電路傳遞到編碼器，產生控制電路的信號。當水位超出設定范圍時能夠自動調整水位使其落在規定的范圍內；水位低了就控制電機工作抽水，使水箱內的水位上升，到達一定高度時電機停止抽水，從而達到不用人工專門去控制即可使水位保持在一定范圍的目的。另外還要使水箱具有顯示水位和超出一定范圍報警的功能。
關鍵詞：水位控制；報警；顯示

Abstract
 This is designed to let water tank of water level with automatic control ability. Sensors to collect signal by amplifying circuit after passed to the encoder, produce control circuit signal. When the water beyond set range can automatically adjust the water level in its fall within the scope stipulated by; Water levels low control motor, that tank pumping water level rose when reach a certain height, the motor stops pumping, thus achieved without artificial specifically to control water can make the purpose of keeping within a certain range. Also make cistern display of water level and beyond a certain range of functions. Police
Keywords：Level control； alarm ；display

目錄
摘要 3
Abstract 4
1引言 6
2 總體方案設計 6
2.1  設計思路 6
2.2  總體設計圖 6
3設計組成及原理分析 7
3.1信號產生部分 7
3.1.1信號的產生 7
3.1.2傳感器的選擇 8
3.2信號處理部分 8
3.3 電機控制電路 10
3.4水位顯示電路 11
3.5 報警控制電路 13
4 小結 15
致謝 15
參考文獻 15
附錄 16