膠印曬版質量控制的理論與實踐探討

印刷工程論文編號:YS077  論文字?jǐn)?shù):9995.頁數:22

目  錄

中文摘要……………………………………………………………………………Ⅱ
英文摘要……………………………………………………………………………Ⅲ
目錄…………………………………………………………………………………Ⅳ
1. 緒論………………………………………………………………………………1
 1.1 課題背景及意義……………………………………………………………1
 1.2 研究內容 …………………………………………………………………2
2. 膠印曬版質量控制的理論探討…………………………………………………3
2.1 PS版的的質量控制…………………………………………………………… 3
2.2 制版環節的質量控制……………………………………………………………5
3. 膠印曬版質量控制的實驗研究…………………………………………………7
 3.1 實驗設備、材料及參數……………………………………………………10
 3.2 實驗數據及處理……………………………………………………………13
 3.3 實驗結論及工藝改進………………………………………………………15
4. 結論與展望………………………………………………………………………17
致謝………………………………………………………………………………… 18
參考文獻…………………………………………………………………………… 19

摘 要：本論文主要通過實驗的方法，通過對印刷過程中的網點密度的數據測驗，跟蹤網點轉移過程中影響網點成像質量因素。論文首先介紹了PS版的概況，提出研究PS版成像質量的重要意義，然后分析了影響PS版本身質量的幾個因素及相應的控制方法。論文重點介紹了曬版過程中的質量控制和影響曬版質量的因素，對提高印刷效率及印刷質量有著重要的指導意義。通過實驗對印刷網點的轉移過程進行了監測，提出了CTF線性化的具體操作方案，探討了曬版環境對制版質量的影響，提出了制版過程規范化、標準化的思路。
關鍵詞：PS版；曬版；網點轉移；CTF；曬版質量

Abstract: Through experimental method, the data density in printing process is measured and tested, and the inflence of dot transfer process to dot imaging quality is tracked in this thesis. The general information of PS is introduced, which shows reaserch PS platemaking quality is very important, and the main factors witch impact the platemaking quality is analysised. The quality controling process of PS is recmmonded. Some methods to improve the printing efficiency and printing quality are put out. Through experiments, the transfer process of printing dot is monitored; the CTF linearization scheme is put forward. The environment influence of plate burning is discussed, and the thinking of standardization and normalizing is raised.
Keywords: PS version; burning; dot transfer; CTF; plate-making quality