1.4RP載重子午線汽車輪胎優化設計與加工工藝研究

機械設計制造及其自動化論文，論文編號:JX997  論文字?jǐn)?shù):15146.頁數:26

摘   要
 隨著公路建設和汽車工業的不斷發展，對輪胎使用性能的要求越來越高。原來生產的1.4PR載重汽車輪胎由于花紋結構陳舊，并時有肩空和胎圈磨損等質量問題，已經不能適應市場需求。為此，在對市場調研后，對1.4PR載重子午線輪胎進行了優化設計和加工工藝研究。
 本文主要通過對子午線輪胎結構特點的分析，并探討了輪胎結構與輪胎特性方面的關系，還有輪胎結構參數和車輛特性的關系。然后根據分析的結果對輪胎的帶束層，胎圈，胎體和胎冠進行了結構的優化設計。并用三維設計軟件進行三維建模。最后對輪胎的加工工藝進行研究，并制作加工工藝卡。

關鍵字：汽車輪胎  子午線  優化設計  加工工藝

Abstract
 With the road construction and automobile industry continues to develop, the tire performance requirements are high. The original truck tire production 1.4PR structure as the old pattern, and when the shoulder and bead wear air quality problems, has been unable to meet market demand. To this end, after market research, we design and processing of the 1.4PR radial truck tire .
 In this paper, by analyzing the characteristics of radial tire structure and the structure of the tire and tire properties relationships, as well as tire structure parameters and the relationship between vehicle characteristics. Then the results of the analysis of tire belt, bead, carcass and tire crown The structure of the optimal design. Use three-dimensional design software to do three-dimensional modeling. Finally, to make the tire processing technology research and production of processing card.
Keyword: Car tire    Meridian    Optimization    Fertigungsplanung

目錄
第一章 緒論 1
1.1汽車輪胎的發展趨勢 1
1.2子午線輪胎的構造及特性 1
1.3課題的提出 3
1.4本文完成的工作 3
第二章 輪胎的優化設計 4
2.1子午線輪胎的結構特點 4
2.2輪胎特性與輪胎結構元件的關系 5
2.3輪胎的優化設計 9
2.3.1帶束層的設計 9
2.3.2胎圈的設計 10
2.3.3胎體的設計 12
2.3.4胎冠的設計 13
2.4輪胎的優化設計模型 13
第三章 輪胎加工生產過程研究 15
3.1子午線輪胎制造工藝特點 15
3.2子午線輪胎制造工藝流程和工藝條件 15
3.2.1制造工藝流程 15
3.2.2生產工藝條件 15
3.3原材料的混煉工藝 16
3.3.1原材料加工 16
3.3.2配料的工藝要求 16
3.3.3膠料的快速檢驗 17
3.3.4混煉工序 17
3.4胎面的加工制造工藝 18
3.4.1胎面等部件的制造工藝 18
3.4.2胎面部件的制作工藝流程 19
3.4.3胎面的壓出工藝條件 20
總結 21
致謝 23
附錄： 24
1輪胎部件加工工藝卡： 24
2原材料的混煉加工工藝卡 25