游標卡尺盒注塑模具設計

論文編號:JX1507  論文字?jǐn)?shù):17023.頁數:39 附任務書，開題報告，實習報告，外文翻譯，CAD圖，solidwork三維圖，PPT

摘要
 模具是工業生產的基礎工藝裝備，是機械工業和高新技術產業的重要組成部分。注塑模具在模具領域中發展最快，應用最廣泛，因此，研究注塑模具對了解塑料產品的生產過程和提高產品質量有很大意義。本文的課題是游標卡尺盒注塑模具設計，文中首先對注塑件進行結構、工藝分析，然后通過測繪確定出了塑件的零件圖。在已知塑件材料為PP1340的情況下，確定了PP1340的收縮率、塑件的尺寸精度、塑件的表面質量及成型的工藝參數，最后根據這些參數確定了注塑機的類型。在模具設計過程中，首先對分型面及型腔的數目進行確定，選擇模架后分別對澆注系統、澆口、導向定位機構、滑塊、頂出系統、排氣系統、冷卻系統進行設計。模具的初步設計完成后，用Solid works軟件中的塑料顧問分別對澆口位置、塑料填充、冷卻質量、注塑壓力等進行分析，來驗證模具設計的要否所合理，從而完成模具的設計。
 
 關鍵詞：塑料注塑模  塑件工藝分析  模具參數

　Abstract
 Mold is the basis for industrial production technology and equipment, and an important part of the machinery industry and high-tech industries. Injection mold is growing fastest and being most widely used in the mold areas. So studying the knowledge of injection mold is good to know more about the process of plastic products, and it also makes sense to improve the products quality. This article is about the injection mold design and this design is for a product of calipers box. Firstly, it produces the molding’s structure and technology, and then draw the detail drawing through mapping. In the case of knowing the mold material which is PP1340, the article makes sure of shrinkage, dimensional accuracy, surface quality and technological parameter of molding. At last, on the basis of those parameters choose a right injection molding machine. In the process of design, at first, it makes sure the numbers of molding sand and the location of parting surface. After choosing the mold base, start to design gating system、pouring gate、guide rail system、sliders、ejection system、exhaust system、cooling system. After finishing the first step of design, using plastic advisor of a part pro/engineer analyses gate location、molding filling、colling quality、injection pressure and so on to make sure the design is or not right. If everything is ok, then finish the design.
 
 
 Key word: plastic mold, technical analysis of molding, mold parameters

 目   錄
1 引 言 1
2 注塑件的分析 2
 2.1 注塑件零件圖 2
 2.2 塑件的工藝分析 2
 2.3 PP1340塑料的主要工藝性能 3
 2.4 PP1340的收縮率的確定 3
 2.5 塑件的體積與質量計算 4
 2.6 塑件的尺寸精度 4
3 注塑成型參數確定 8
 3.1注塑成型工藝過程 8
 3.2注塑機的選擇 10
4 模具設計 13
 4.1 模具設計的流程 13
 4.2 分型面的確定及型腔數目的確定 14
 4.3澆注系統設計 15
 4.4.排氣系統設計 19
 4.5 成型零件的設計與計算 19
 4.6. 溫度調節系統的設計 24
5 注射機的校核 26
6 模具加工工藝流程 28
結論 30
參考文獻 32
致謝 33
附錄一  塑料制品的公差數值表 34
附錄二  常用液壓機的技術參數 35
附錄三  部分國產常用注塑機的技術參數 36