松下手機的逆向造型研究

論文編號:JX1569  論文字數:16514.頁數:34 附任務書，開題報告，外文翻譯

松下手機的逆向造型研究
 摘  要：隨著計算機技術的迅速發展，計算機三維造型技術特別是逆向工程技術在工業上已經得到了廣泛的應用。為了解決手機外形設計周期長的困難，本文研究了手機外形的逆向工程造型方法，并對逆向工程概念、方法進行系統的闡述，同時又以松下G60手機為例詳細介紹了對手機外形進行逆向工程的步驟。
關鍵詞：逆向工程，點云，快速制造，STL
                       Panasonic phones reverse modeling study
 Abstract: With the rapid development of computer technique, the technology of 3D computer-aided prototyping, especially the Reverse Engineering, has been more widely used in industry.  In order to solve the problem of long time on the mobile phone’s shape-design, a method based on the integrated reverse engineering is discussed in the paper.  Furthermore, the concept and method of the Reverse Engineering is also illustrated, and the step of the integrated reverse engineering of mobile phone’s shape-design process is presented in detail with the example of Panasonic G60.
Keywords: Reverse Engineering ,  Point Cloud ,  Rapid Manufacturing ,  STL
目    錄

1．概 述 1
1．1逆向工程原理 1
1．2逆向工程特點 2
1．3逆向建模的一般流程圖 3
1．4逆向工程的應用領域 3
2．逆向工程一般步驟 3
2．1實體三維數據的獲得——掃描 3
2．2點云處理 5
2．3曲面重構 5
2．4實體建模 8
2．5快速制造 9
3．逆向工程軟硬件設備 10
3．1掃描設備 10
3．2點云曲面處理軟件 11
3．3實體建模軟件 12
3．4快速成型設備 14
4．建立手機外形具體步驟 15
4．1松下G60手機外形逆向開發的流程 15
4．2模型分析 15
4．3掃描 15
4．4點云數據清理 16
4．5曲面造型 18
1．建立對稱平面 18
2．建立上表面 19
3．建立下表面 20
4．建立側面 21
5．曲面初次裁剪 22
6．建立倒角面 23
7．建立棱角曲面 24
8．曲面再次裁減 24
9．建立按鍵曲線 25
10．整體鏡像操作 25
11．曲面連續性處理 26
12．誤差分析 27
13．數據精簡 28
14．數據轉化導出通用格式 28
4．6實體造型 28
1．數據導入 28
2．曲面縫合及模型實體化 29
3．建立手機按鍵 30
5．結 論 35
6．謝 辭 35