AWGN噪聲中正弦信號的檢測與仿真

電子信息工程論文編號:DZXX049  論文字?jǐn)?shù):8228,頁數:22

 目錄
摘要 I
ABSTRACT II
第1章 引言 1
 1.1研究的背景 1
 1.1.1 理論背景 1
 1.1.2 仿真背景 2
 1.2 研究內容 2
第2章 理論分析 4
 2.1 接收機模型 4
 2.2 信號的匹配濾波器 5
 2.3 信號的判決門限 6
 2.4最佳差錯性能 7
 2.5 ASK系統的誤碼率 8
第3章 系統軟件設計 11
 3.1動態系統仿真軟件System View簡介 11
 3.2 System View軟件進行通信系統的動態仿真步驟 11
 3.3 系統的分步說明 11
 3.3.1 積分清除濾波器 11
 3.3.2 重采樣 12
 3.3.3 門限判決 12
 3.4 系統設計 13
 3.4.1 說明 13
 3.4.2 定時與參數設置 13
 3.4.3 全局參數關聯 14
 3.4.4 系統圖 15
 3.5 仿真分析 15
 3.6 FSK仿真結果 16
第4章 系統設計總結 17
致謝 18
參考文獻 19

摘要

 隨著技術的發展,現代無線通信系統功能日趨強大,性能指標越來越高,無線通信系統越來越復雜其工作的過程描述又很抽象。與此相對應的是,研制費用不斷上升,對各部分及系統的研究變得更加困難。如果無線通信系統的研究全部用實際設備來實現,人力、物力、財力花費都是巨大的,而且研制周期也會增加,此外有的研究實際的設備也不一定能有效地實現。因此,通信信號模擬仿真以其經濟、靈活和逼真等特點逐漸成為通信系統的設計分析過程中不可或缺的手段。
   本文第一章主要講述了通信系統的檢測和仿真的重要性。第二章主要從理論層次上論述了通信中信號在AWGN噪聲中的檢測的方法，具體的以ASK信號為模型，通過對其最佳接收機的建立和最優判決門限的設定，得到信號的檢測目的。最后第三章介紹了system view軟件虛擬儀器建立的方法，進行ASK信號進行的仿真檢測，驗證理論的正確性。

關鍵詞： AWGN，ASK，System View，仿真分析

ABSTRACT

 With the development of technology, the functions of modern wireless communication system are becoming much stronger and the performance index of wireless are much higher. Complexity of communication system is increasing and the procedure description is very abstract. Corresponding to this, the cost of development is increase and the system of each part of the study become much more difficult. If the study of a wireless communication system to achieve with full practical equipment, ,not only costs of human、 material and financial resources are huge, but also increases the development cycle, besides some research facilities are not can effectively achieve. Therefore, analysis process plays an important part in design of communication system because of its economic simulation, flexible and lifelike features.
 This first chapter described the importance of testing and simulation in communication system basically. The second chapter basically discussed the method to detect sinusoidal signal with AWGN noise, as ASK signals for example. This chapter also described how to calculate or set the best judgment threshold of receiver. The third chapter presented the method to detect and simulate signal using System View .The result of simulation is in accordance with the theory..

Keywords: AWGN, ASK, System View, Simulation