年產1萬噸裝飾原紙工廠壓榨部、干燥部及完成整理部工藝設計

輕化工程論文編號:QH004  論文字?jǐn)?shù):20277,頁數:77  附CAD圖

目 錄
摘要 Ⅰ
ABSTRACT Ⅱ
目錄
1 緒  論 1
1.1  設計背景 1
1.2  市場需求預測 1
1.3  可行性分析 1
1.4  設計范圍及指導思想 4
1.4.1  設計范圍 4
1.4.2  設計指導思想 4
2 工藝 6
2.1  技術指標 6
2.2  工藝流程 9
2.2.1  工藝 9
2.2.2  主要流程 10
2.2.3  設計重點 13
2.3  工藝條件及工藝參數選擇 15
2.4  漿水平衡計算 17
2.4.1  計算 17
2.4.2  漿水平衡表 28
2.5  原材料、蒸汽及水的單位耗用量 30
2.5.1  原材料的單位耗用量 30
2.5.2  蒸汽的單位耗用量 30
2.5.3  技術經濟指標 31
2.5.4  清水單位耗量 32
2.6  主要工藝設備的選型計算及說明 32
2.6.1  造紙機 32
2.6.2  設備說明 34
2.6.3  漿池的選擇 34
2.6.4  其他設備 35
3 工程總體設計 36
3.1  廠址選擇 36
3.1.1  廠址選擇的基本原則 36
3.1.2  廠址的選擇 36
3.2  原料及能源供應 37
3.3  全廠總平面圖的介紹與分析 37
3.3.1  廠區總平面布置的基本原則 37
3.3.2  總平面布置 39
3.3.3  廠內外運輸 40
3.4  車間設備布置 40
4 其他工程設計 42
4.1  輔助生產工程設計 42
4.2  公用工程設計 42
4.3   環境保護 46
4.4  勞動安全衛生 49
4.5  人員編制 51
5 設計總結 54
致  謝 55
參考文獻 56

年產1萬噸裝飾原紙工廠設計--重點: 壓榨、干燥部及完成整理部工藝設計

 摘要：本設計主要是設計年產1萬噸的裝飾原紙工廠，重點為壓榨，干燥及完成整理部。主要內容包括可行性分析，工藝流程設計和計算，設備選型布置及其他輔助設施的設計。
 首先在參考了相關文獻資料和一些裝飾原紙企業的實際資料的基礎上，結合裝飾原紙這種紙的特性對設計背景和設計可行性進行了分析論證，然后設計工藝流程并進行計算，得出噸紙?jiān)�材料和水電氣的消耗，然后選擇合適的生產設備，合理布置到車間內，最后對輔助設施（給排水、熱電、三廢處理、廠區綠化、勞動安全等）以及環保（充分考慮廢水、廢氣、廢渣的循環利用）進行設計安排。
 關鍵詞：造紙；裝飾原紙；壓榨；烘干；卷取

The design of papermaking mill producing 10000 tons of decorative paper ever year
Focus: the pressing, drying and complete section

Abstract: This paper is mainly to design the decorative raw paper of plant with 10,000 tons of annual output, focusing on pressing, drying and complete the finishing sections. The main contents including feasibility analysis, technology process design and calculation, equipment selection and layout, and the design for additional auxiliary facilities. 
 First, according to the relevant reference，it is performed analysis to determine the background and feasibility for the design based on some practical data from decorative raw paper companies, combined with the properties of decorative base paper on the design. Subsequently it is obtained the amount of the raw paper and the consume of gas, electric and water by calculated as the technology process designed. Meanwhile, it is necessary to intend for the appropriate equipment and make a reasonable arrangement in the workshop. Finally, it is significant to arrange the auxiliary facilities (such as water supply and drainage, thermal power, waste treatment, green plant, labor safety, etc.) and environmental protection (make waste water, waste gas and other waste full recycled).
Keywords：papermaking; decorative paper; pressing; drying; reeling;