汽車保險箱的結構設計

車輛工程專業畢業論文，論文編號:JX930  論文字?jǐn)?shù):15386.頁數:41

摘   要
 隨著人們生活水平的不斷提高，車子也隨之增加，在此同時車內財產的失竊也越來越多，所以設計一個有效地汽車保險箱至關重要。根據任務書的要求，確定了最終的結構方案。在不斷的匹配和修改中，考慮實際因素，大致完成了一些重要結構和零部件的設計，使其傳動正確，各零件間不產生干涉。對于整體的裝配也在不影響設備正常工作的前提下，不斷優化，盡量縮小了設備的體積。接著通過不斷的優化，進行了所有零部件的設計、三維造型。在完成一系列的零件造型、零件裝配之后，還通過SolidWorks的COSMOSWORKS模塊進行了應力分析、頻率分析。在所有零件分析成功后最后設計了保險箱的電路原理圖，使之滿足運動規律。這次汽車保險箱的設計，雖然比較粗糙，但是希望對防盜的發展具有一定的實際意義。

關鍵詞：保險箱  三維造型  SolidWorks  COSMOSWORKS

ABSTRACT

 With the continuous improvement of people's living standard, the car has increased, at the same time the stolen property inside the car more and more, so the design of an effective and safe car is essential. In accordance with the requirements of the task book to determine the structure of the final program. The match continued and modified in consideration of the practical factors, largely completed a number of important structures and the design of parts and components to the correct transmission and no interference between parts. The overall assembly equipment also does not affect the normal work under the premise of continuous optimization, minimize the size of the equipment. Then through continuous optimization of all parts and components for the design, three-dimensional modeling. Upon completion of a series of parts modeling, spare parts, after assembly, but also through the COSMOSWORKS modules SolidWorks the stress analysis, frequency analysis. Analysis of success in all parts of the safe after the final design of the circuit schematic diagram, so as to meet the movement. Safe design of the car, although the relatively rough, but hope that the development of anti-theft has a certain practical significance.
Keywords: Safety Deposit Box  Three-dimensional modeling  SolidWorks  COSMOSWORKS
目  錄
摘   要 III
ABSTRACT IV
第一章  緒論 1
1.1  選題的背景及研究意義 1
1.2  國內外的研究或設計開發情況 1
1.3  本課題的研究?jī)?nèi)容與擬解決的主要問題 3
第二章  零部件的結構設計與三維造型 5
2.1  底座的設計與造型 5
2.1.1 導向部分 6
2.1.2  止推部分 6
2.1.3 傳動安裝部分 7
2.1.4 底座的材料 8
2.2 抽屜的設計 8
2.2.1 抽屜的結構及尺寸 8
2.2.2 抽屜的材料 10
2.3  傳動機構的設計 10
2.3.1 齒輪傳動的特點及分類 10
2.3.2 齒輪的參數設定 11
2.3.3 齒輪的材料 12
第三章  保險箱的CAE分析 13
3.1 分析的目的 13
3.2 強度分析 14
3.3 頻率分析 23
3.4 諧振分析 27
第四章  電路的設計 30
5.1電路的性能要求 30
5.2電機的啟／停控制 31
5.3電機的方向控制 32
5.4 保險箱的電路原理圖 33
第五章  總結 35
致  謝 36
參考文獻 37