Abstract
V-belt output most heavy, variety most large, use widest first product in the drive belt.Conveying with V-belt is one of the conveying ways which are mostly applied. And V-belt of our country is it rub person who sharpen for two questions to take at present. First, rub and pare the precision, domestic rubing the paring machine is artificial measurement at present, just take and process some precision unqualified V-belt type slightly, it is not very high to rub the precision of paring; Second, examine the long respect online, because rubing paring machines at home is mostly all measurement - processed at present - the processing course that measure, can make measurement and rub pare at the same time carrying on examine long to rub person who pare online yet, it is unable to accomplish can examine to rub long. Under these kind of demand background, there should be very good application prospects more than examining long V-belt to lead and rub the paring machine online of high accuracy to develop a kind of new-type one.
This thesis has recommended this kind of new-type V-belt and led and examined the long control systems soft ware design process of rubing the paring machine. It's time to rub the control system of the paring machine and regard ADUC812 one-chip computer as the core of controlling, Mitsubishi touch-sensitive screen interface machine, software design adopt module structure and assembler language carry on programming. The software design of this control system has already been all finished now, and has already debugged successfully on the hardware equipment of the simulation scene of the laboratory.
This thesis divides into five chapters altogether. Chapter one the introduction, introduce V-belt is it examine long to rub domestic and international current situation of person who pare and analyse to the development trend, equipment of demand to take mainly, have defined the project of this graduation project content uses the background.
Chapter two main content to be introduce the detailed one to lasting technological process of sharpening. In addition, have made an introduction to that V-belt led and examined the long complete machine, structure of the hardware and overall scheme of the control system of rubing the paring machine even.
Is it should rub control system hardware of person who sharpen make up, including taking one-chip computer as the core top management board part, touch-sensitive screen, motor and sensor,etc. to recommend.
Chapter four a focal point of this page thesis. Lead and examine the long software which rubs the control system of the paring machine to design to this V-belt in the article, including the main program of the control procedure and other functions module design program. And has gathered and made an introduction with procedure designing and the programmable controller - the input program of the button to the design, measurement of the one-chip computer and touch-sensitive screen.
Chapter five problem met in the debugging course of controlling the systems soft ware and solutions taken. It is a very important and key step in software design that the procedure debugs, the study programming method skill that it can be very good and settlement ability while going wrong. It is a conclusion finally, and performance to this graduation project subject and main harvest have been summarized.
Keyword: measure；polish；mechanical and electronic intergration；ADμC812
目 錄
