削片機的結構設計與三維造型和運動仿真 (Solid Works)

機械設計制造及其自動化論文，論文編號:JX1226  論文字?jǐn)?shù):7780.頁數:33

摘   要

 面食在北方人的日常飲食中在占有不可替代的地位，削片機在食品機械中也占有重要的地位。在深入了解了削片機的發展?fàn)顩r以及研制面食削片機的意義后，提出了幾個面食削片機的設計方向和結構思路。根據任務書的要求，確定了最終的結構方案。在不斷的匹配和修改中，考慮實際因素，大致完成了一些重要結構和零部件的設計，使其傳動正確，各零件間不產生干涉。對于整體的裝配也在不影響設備正常工作的前提下，不斷優化，盡量縮小了設備的體積。接著通過不斷的優化，進行了所有零部件的設計、三維造型。機構主要包括：底座、蝸輪蝸桿傳動裝置、間歇式進給裝置、切削裝置。在完成一系列的零件造型、零件裝配之后，還通過SolidWorks的COSMOS模塊進行了運動仿真、應力分析、動畫模擬，直觀觀察設備運行效果。這次削片機的設計，雖然比較粗糙，但是希望對食品機械的發展具有一定的實際意義。

關鍵詞：削片機  三維造型  運動仿真  SolidWorks  COSMOS

ABSTRACT

 Pasta in the daily diet of the northerners in possession irreplaceable status, chipper in the food machinery also played an important role. Under deeply understanding of the development and significance of the chipper, the direction and structure of the design ideas of a pasta chipper have been reported. According to the requirements of the mission, the ultimate structure of the programmer was finally determined. In the match and constantly changes, considering the actual factors, I largely completed a number of important structural components and the design and size, the calculation of  the structural parameters. Then through continuous optimization, all parts are taken to the design, 3D modeling. Agencies include: the base, turbine vortex-transmission, intermittent feeding devices, cutting device. Upon completion of a series of parts modeling and assembly parts, the COSMOS of SolidWorks was also been adopted for a motion simulation module, stress analysis, animation, simulation, visual observation equipment operating results. The design of the chipper, although relatively rough, but I hope has a practical significance for the development of food machinery.
 
 
Keywords: chipper Three-dimensional modeling Sport Simulation
目  錄

中文摘要
英文摘要 Ⅲ
目錄 Ⅳ
第一章  緒論 1
1.1  選題的背景及研究意義 1
1.2  國內外的研究或設計開發情況 1
1.3  SolidWorks三維造型、運動仿真技術的發展現狀 2
1.3.1 實體建模 2
1.3.2 裝配模塊 3
1.3.3 工程圖 3
1.3.4 鈑金設計功能 4
1.3.5 應力分析功能——COSMOSWorks 4
1.3.6 運動分析功能——COSMOSMotion 4
1.3.7 動畫功能——SolidWorks  Animator 5
1.3.8 渲染功能——PhotoWorks 5
1.4  本課題的研究?jī)?nèi)容與擬解決的主要問題 6
第二章  結構零部件的設計與三維造型 7
2.1  料倉的設計與造型 7
2.2  推面裝置的設計 9
2.3  間歇式進給裝置的設計 11
2.4  削片機構的設計 14
2.5  底座的設計 16
第三章  結構零部件的三維裝配 17
第四章  機構的運動仿真 25
第五章  總結 28
參考文獻 29
致  謝 30