一種高速盤式電磁鐵的設計

機械設計制造及其自動化論文，論文編號:JX1488  論文字?jǐn)?shù):11327.頁數:29 

摘    要
 隨著現代工業水平的不斷提高，流體控制技術已經獲得了日益廣泛的應用，并得到世界各發達國家的高度重視和大力投入，它的應用已成為衡量一個國家工業水平的重要標志之一。電磁閥作為伺服系統的核心控制元件之一，其性能將直接影響甚至決定著整個控制系統的性能。現代工業技術的發展對電磁閥的控制精度和響應速度均提出了更高的要求，對電磁閥的內部結構進行改進設計是一種行之有效的解決途徑。
 在電磁閥的各個環節中，電-機械轉換器是響應最為滯后的一個環節，其響應時間通常能占到整個電磁閥響應時間的70%～80%，在整個電磁閥中扮演著至關重要的作用。本文在國內外閥用電-機械轉換器的相關研究的基礎上，設計了一種電磁閥用的電-機械轉換器——盤式電磁鐵。
 本文首先通過對螺管式電磁鐵的理論分析，了解電磁鐵的設計；然后根據已知參數，計算出盤式電磁鐵的各部件尺寸并選擇了結構，畫出高速盤式電磁鐵的各部件圖和其結構圖。
 本文分為四章：第一章  緒論,主要講述了電磁閥的發展概述、電-機械轉換器的應用及研究現狀、盤式電磁鐵的研究、選題的背景及研究意義，第二章  螺管式電磁鐵的理論分析,主要講述了磁場計算基礎、螺管式電磁鐵，第三章  盤式電磁鐵的設計, 主要講述了盤式電磁鐵的設計計算、盤式電磁鐵的結構，第四章  結論
關鍵詞      盤式電磁鐵；   電-機械轉換器;   螺管式電磁鐵;

Abstract
 With the improvement of modern industry, the fluid control technology has gained wide application, and the developed countries of the world and the application, it has become a national industrial level one of the important marks. Electromagnetic valve as servo system is one of the core control components, which will directly affect the whole control system, and even the performance. The development of modern industrial technology of electromagnetic valve control precision and response speed were put forward higher request, the internal structure of electromagnetic valve improved design is a kind of effective solution.
 In every link of the electromagnetic valve, electromagnetic machinery converter is one of the most lag response, the response time can usually the electromagnetic valve response time of 70% ~ 80% in the electromagnetic valve, plays a vital role. This valve electric machinery at home and abroad research foundation of the converter, design a kind of electromagnetic valve electric machinery converter – disc electromagnets.
 Firstly, through the electromagnet coil theory to understand the design of electromagnet; then the basis of known parameters, calculate the disc magnet size and select the various parts of the structure, high-speed disc magnet to draw the various parts map and the structure diagram.This article is divided into four chapters: Chapter Ⅰ Introduction, Mainly about the development of an overview of the electromagnetic valve, electrical - mechanical converter application and research status, disc magnet research, background and significance of research topics，Chapter Ⅱ Solenoid Electromagnet theoretical analysi, Calculated on the basis of magnetic field were described, Solenoid Electromagnet，Chapter III disc design of the electromagnet, Mainly about the design and calculation of disc magnet, disc magnet structure，Chapter IV Conclusions
Keywords: disc electromagnet; Electrical machinery converter; Solenoid Electromagnet
 
目  錄
中文摘要 1
英文摘要 2
目錄 3
第一章     緒論 4
1.1  電磁閥的發展概述 4
1.2  電-機械轉換器的應用及研究現狀 5
1.3  盤式電磁鐵的研究 11
1.4  選題的背景及研究意義 13
第二章     螺管式電磁鐵的理論分析 14
2.1   磁場計算基礎 14
2.1.1  有限元方法 14
2.1.2  有限元模型 15
     2.2  螺管式電磁鐵 16
         2.2.1  有限元法計算 16
         2.2.2  螺管式電磁鐵的結構 17
第三章     盤式電磁鐵的設計 20
3.1   盤式電磁鐵的設計計算 20
3.1.1  電磁鐵的工作參數 20
3.1.2  設計程序 20
 3.2   盤式電磁鐵的結構 26
第四章     結論 27
參考文獻 28
致謝