冰箱抽屜注塑模設計

材料成型及控制工程論文，論文編號:JX1459  論文字數:22629.頁數:48  附任務書，開題報告，文獻綜述，外文翻譯  CAD圖

摘要

 近年來，塑料產品和塑料模具得到了飛速的發展，應用也越來越廣泛。本文為冰箱抽屜設計了一副注射模。設計過程主要利用了Moldflow、UG和AutoCad工具軟件，充分利用計算機輔助的優越性實現了設計方案。作者首先Moldflow進行了CAE分析，得到一系列的計算結果,接著分析了塑件的結構工藝性，選擇了單分型面模具，采用滑塊裝置，并利用AutoCAD及燕秀工具箱完成了模具二維圖紙的設計。然后，利用了UG的三維建模功能將模具二維圖紙進行三維造型。最后利用AutoCAD修改該副模具的總體裝配圖和繪制一些重要零件的零件圖。所設計的模具結構簡單，機構運行可靠，所繪制的模具圖紙對實際生產具有指導意義。
 
關鍵詞:  注射模  UG  Moulflow  計算機輔助設計

Abstract
 In recent years, plastic products and plastic mold have developed rapidly, and their applications become more and more extensive. One injection mold for a refrigerator drawer was designed in this dissertation. The software tools of UG, AutoCAD and Moldflow are mainly used in the design process，and the advantages of computer-aided design programs were fully utilized to achieve the design scheme. Firstly, the author finished CAE analysis on parts by using Moldflow and obtained a series of calculated results, and analyzed the structure of the plastic part, and then chosed a single-mold surface and oblique-slip devices, and finished the drawings of the mold by AutoCAD and Yanxiu Tools at last.Then, parts modeling with the UG Moldwizard were finished. Finally,the author drew die deputy general assembly and some of the important parts with using the AutoCAD. As a whole the mould is simple in structure and good at working reliability. The design of this injection mold is of some significance for the fact production. In short, the mold design is simple and reliable, and the drawings of the mold are instructive for the actual production.
Keywords:  Injection mold;  UG;  Moldflow;  Computer-aided Design

目錄
摘要 i
Abstract ii
目錄 iii
第一章  緒論 1
1.1  引言 1
1.2  注塑模具發展動向 1
1.3  冰箱抽屜零件介紹 3
1.4  透明注塑件模具設計要點 4
1.5  注塑模具CAD/CAM/CAE發展趨勢 5
1.6  小結 7
第二章  冰箱抽屜的CAE仿真分析 8
2.1  Moldflow 軟件簡介 8
2.2  冰箱抽屜的CAE仿真結果分析 10
2.2.1  導入冰箱抽屜模型 10
2.2.2  網格缺陷修改 11
2.2.3  最佳澆口位置確定 12
2.2.4  流動及翹曲的分析計算 12
2.2.5  流動及翹曲結果及相關處理 14
第三章  冰箱抽屜模具的熱流道技術使用 17
3.1  熱流道技術原理 17
3.2  塑模中的熱流道技術 17
3.3  充分發揮熱流道作用方法 21
3.4  熱流道系統型號選擇 22
第四章  冰箱抽屜注射模的其他零件設計 26
4.1  材料GPPS相關知識 26
4.2  塑件工藝性分析 27
4.3  分型面的選擇 29
4.4  成型和結構零件的設計 30
4.4.1  型芯和型腔的生成 30
4.4.2  材料的選擇 34
4.4.3  排氣結構和分析 35
4.4.4  側抽芯機構的設計 36
4.4.5  導向機構設計 36
4.4.6  緊定螺栓的選取 38
4.5  模架的選擇與模具結構設計 38
4.6  冷卻系統設計 38
4.7  UG完成的三維圖 39
4.8  注塑機型號選擇 40
第五章  總結 41
參考文獻 42
致謝 43