鈴蓋的注塑模設計

模具論文編號:JX968  論文字?jǐn)?shù):14255.頁數:39   附CAD圖
目  錄

中文摘要ⅰ
英文摘要ⅱ
目錄ⅲ
第一章  緒論1
 1.1  注射成型模具的地位及發展趨勢1
   1.1.1  注射成型模具的地位1
   1.1.2  注射成型模具的發展趨勢2
 1.2  畢業設計選題的背景、設計方法、目的和意義2
   1.2.1  設計選題的背景和設計方法2
   1.2.2  設計的目的和意義2
第二章  塑件工藝性及成型工藝條件3
 2.1  鈴蓋成品圖3
 2.2  塑件結構工藝性分析3
 2.3  塑件成型工藝條件分析4
第三章  成型設備9
 3.1  成型設備的選擇9
 3.2  注射機基本參數的校核9
第四章  模具的結構設計·12
 4.1  型腔數目的確定和排列方式·12
 4.2  分型面的選擇·13
 4.3  澆注系統的設計·14
 4.4  成型零部件的設計·17
 4.5  脫模機構·21
 4.6  調溫系統·23
 4.7  導向機構·25
 4.8  排氣系統·26
第五章  模具的安裝及調試·28
 5.1  模具的安裝·28
 5.1.1  模具總裝圖·28
 5.1.2  模具的裝配·28
 5.2  模具的開合動作分析·30
 5.3  試�！�31
致謝·34
參考文獻·35
附錄 圖紙10張                      

摘   要

 本設計詳細地闡述了鈴蓋注射模具的參數化設計過程，給出了注射模具設計的基本步驟。在對產品進行結構分析和工藝分析的過程中，使用了UG,Mlodflow等工具來模擬注塑過程、分析成型過程中的參數變化、預測產品質量和可能出現的缺陷。列出了注射機選擇的主要依據，并對主要參數進行了校核。在模具的結構設計的過程中，舉出了各部分設計時應參照的公式，并結合本課題進行了具體的分析。在分型面的選擇問題上，本設計列出了三種方案，通過分析比較，選擇了一種最佳方案。重點分析設計了溫度系統，說明了調溫系統對產品成型的重要性，通過軟件分析結合教科書最終確定散熱面積、冷卻水道直徑、冷卻水道長度等工藝參數。在設計完結構后，對模具的安裝進行了大致的說明，對模具的開合動作做了必要的分析，對試模過程中可能出現的問題做了詳細的分析，并提出了相應的解決方法。使用UG進行三維造型貫穿整個設計過程，使設計變得很輕松，也可以及時地發現模具中的干涉等問題。
 
 關鍵詞：注射模，UG，模具分析， 鈴蓋

The mold design of bell cap injectinon
Abstract

This paper has elaborated the injection mould parametric design of the Round Box, and mentioned the general steps of injection mould design. During plastic part analysis and structure analysis, MPA is used to simulate the filling process, analysis the parameters’ change during molding and forecast the filling quality. How to choose machine and check the main parameters is involved in this paper. During the structure design of the mold, the principle of each part is been listed out and analysised combining this title. The issue of designing parting plane, there list three programs and choose the best one at last. The determination of side core’s parameters is referenced to the method of oblique guide. The design points of the side core is listed out. The temperature adjusting system’s design and analysis is the focus in this paper. Here elaborated the importance of the temperature adjusting system, and detailed calculated the heat that enter and out the mold, then determined the parameters of cooling system. After the design of structure, this paper simply explains the assemble order, analyses the course of mold opening and closing. It analyses the problem that would appear during testing the mold and gives some blue print to solve those problem. UG is being used to built of three-dimensional model. It makes the design a easy work, and some problems like intervene has been found out in time.
 
Keywords: Injection Molding, UG, Plastic Molding Analysis, Round Box