某型錐形蓋沖壓工藝及其模具設計

論文編號:JX1650  論文字?jǐn)?shù):10097.頁數:27 附任務書，開題報告，外文翻譯,CAD圖

某型錐形蓋沖壓工藝及其模具設計
摘要：沖壓制品已在工業，農業，國防和日常生活中的方面得到廣泛應用,特別是在機械業中則為突出。機械產品的外殼大部分是沖壓制品，產品性能的提高要求高素質的沖壓模具和沖壓性能，成型工藝和制品的設計。
    沖壓制品的成型方法很多。其主要用于是沖孔，落料，彎曲，拉深等。而沖壓模，約占成型總數的60%以上。當然如利用電氣控制，可實現半自動化或自動化作業。
冷沖沖裁模主要用于金屬制品的成型，它是沖壓制品生產中十分重要的工藝裝置。沖壓模的基本組成是：上下模座、下模墊板、下模固定板、凹模鑲塊、抬料釘、導料板、卸料板,導柱導套、卸料板彈釘、卸料板等。
沖裁模成型的廣泛適用，正是我這個設計的根本出發點。

關鍵詞：模具，沖孔，落料，拉深

Stamping process and die design

Abstract：Stamping products has been extensively applied in the industry, agriculture, national defense and in the daily lives of area, especially in the machinery industry. Mechanical products is the most pressing housing products, and the improvement of product performance requires of high-quality performance stamping molds ,stamping,process and product design.
   There are many ways of molding products of stamping. Piercing is mainly used for blanking, bending, stretching, etc. And Stamping molds almost  form more than 60 percent of the total number. For example ,Electrical Control can be realized as semi-automatic or automatic operation.
   Cold-metal stamping die mainly used for the molding products, and it is very important in the production of stamping technology devices. The basic component of stamping molds is block model from top to bottom, mould plate, fixed-plate of mould plate, die inserts, raising nails, I. plate
, plate unloading I. Introduction sets column, unloading bombs nail plate, plate Discharge and so on.
   The widely application of blanking moulding is exactly the basic perpose of my design.
Keywords:  Molding tool   Piercing    Blanking   Drawing

目    錄
前言 1         
1 沖壓工藝性分析和方案的確定
1.1零件工藝性分析 3
1.2工藝方案的確定 3
2  模具總體設計
2.1模具類型的選擇 5
2.2操作與定位方式 5
2.3卸料、出件方式 5
2.4確定送料方式 6
2.5確定導向方式 6
3  零件的工藝計算
3.1拉深工藝計算 7
3.2落料拉深復合模工藝計算 8
3.3沖孔切邊復合模工藝計算 13
3.4沖壓工藝過程 15
4模具零部件結構的確定
4.1定位零件的結構設計 16
4.2卸料、頂件、推件零件的結構設計 16
4.3凹模的結構設計 17
4.4其他支承零件的設計 18
4.5凸模的結構設計 19
4.6凸凹模的結構設計 16
4.7模具閉合高度 20
4.8模具零部件設計 20
4.9確定裝配基準模 21

5沖壓設備的選用與校核
5.1落料拉深復合模壓力機設備的選用 22
5.2沖孔切邊復合模設備的選用 22
5.3校核模具閉合高度 22
6模具的工作原理
6.1  落料拉深復合模的工作原理 24
6.2  沖孔切邊復合模的工作原理 24
結   論     26
參考文獻 27
致    謝 28