ARM芯片編程設計FAT12文件系統

電子信息工程論文編號:DZXX251  論文字?jǐn)?shù):11419,頁數:40

目      錄
摘 要 I
Abstract II
第1章  緒論 1
1.1開發背景 1
1.2研究內容 2
1.3 開發語言 2
第2章  文件系統介紹 3
2.1 FAT12文件系統 3
2.1.1 FAT的基本原理： 3
2.1.2 FDT的結構： 4
2.2 FAT12存儲原理 5
第3章  文件系統操作函數設計 9
3.1 軟件設計方案 9
3.2 頭文件與部分操作函數介紹 9
3.2.1 頭文件中結構體的定義 9
3.2.2 格式化函數 14
3.2.3創建新目錄函數mkdir（） 19
3.2.4創建函數creat() 20
第4章  總結 22
致謝 23
參考文獻 24
附錄一  程序代碼 25

摘 要
 隨著電子技術的快速發展，特別是大規模集成電路的產生而出現的微型機，使現代科學研究得到了質的飛躍，而嵌入式微控制器技術的出現則是給現代工業控制領域帶來了一次新的技術革命。由嵌入式微控制器組成的系統，最明顯的優勢就是可以嵌入到任何微型或小型儀器、設備中。隨著嵌入式設備與Internet的廣泛地結合，手機、PDA、路由器和調制解調器等復雜的高端應用對嵌入式處理器的性能提出了更高的要求，因此開發32位高性能處理器將是嵌入式技術發展的必然趨勢。本論文的設計主要采用ARM芯片編程設計FAT12文件系統操作函數，該操作函數可以用于對文件的管理。系統選用飛利浦公司的ARM7芯片LPC2214來設計一套嵌入式的文件系統。主要實現對文件的管理和各函數間的調用功能，包括格式化，打開，關閉，讀，寫，建立，刪除，查找，列舉目錄下的文件等功能。本論文主要介紹了以上相關部分軟件的設計。

關鍵詞：ARM系統,  嵌入式, 文件系統

Abstract
 Along with the electronic technology fast development, with the large scale integrated circuit technology development the miniature machine  appears, which make the modern scientific research obtain great leap. Meanwhile the appearance of embedded controller technology has brought a new technological revolution in modern industry control field. The most obvious superiority in system composed of embedded controller is may be inserted to any miniature or small instruments and equipments. Along with the widely combination of embedded system and Internet, the complex  application  in mobile phone, PDA, router and modem etc put forward a higher demand on the performance of embedded processor, therefore developing 32-bit high performance processors will be a inevitable trend. This dissertation mainly use the ARM chip to design the FAT12 file system operation functions, these operation functions may be used in file management. In this system the Phillips ARM7 chip LPC2214 is used to design a embedded file system, which carry out the document management and various calling among different functions. These functions include formatting、opening、closing、reading、 writing、creating and so on. This dissertation mainly introduced the partial software design above mentioned.
 
Keywords: ARM System,   Embedded  System,   File System