在WCDMA中基帶成形濾波器的設計

論文編號:TX422  論文字?jǐn)?shù):18161,頁數:41  附任務書，開題報告，外文翻譯

摘 要

 WCDMA技術已經普遍在全球范圍內進行使用。針對WCDMA的相關技術的發展也越來越顯重要。然而WCDMA技術并不完美，碼間干擾就是其缺點之一。
 首先，本論文對第三代移動通信進行了討論，介紹了WCDMA移動通信系統的發展以及我國第三代移動通信的研究情況；講述了基帶成形技術和數字濾波技術；重點針對WCDMA系統中存在的碼間干擾的問題，提出以成形濾波器來解決的方案。鑒于MATLAB的強大功能，本文分別用窗函數法、雙線性變換法、升余弦直接設計法和FDAtool法等方法來實現基帶成形濾波器。最后基于MATLAB對各種方法進行比較，分析各個方法的特點，得出最佳的設計方法。
 
關鍵詞：WCDMA，基帶成形技術，數字濾波器
ABSTRACT

 WCDMA technology has generally conducted on a global scale use. The WCDMA technology for the development is more and more important. WCDMA technology is not perfect, however, the code of the interference is one of its shortcomings.     First, the article on third generation mobile communications were discussed on the WCDMA mobile communication systems and the development of China's third generation mobile communications research；the paper discussed on forming a base-band filter technology and digital filtering technology；the code of interference and its solution were discussed.It is proposed to form a filter paper for the WCDMA solution to solve the communication system in the code of the interference problem. In view of the power of MATLAB,the design of methods used to achieve a window function,bilinear transformation, directly or cosine law FDAtool design and methods. Finally that is based on MATLAB on various methods to be compared and analyzed the characteristics of the various methods, that the best design methods.
 
KEY WORDS :WCDMA,Baseband forming technology,Digital Filter

目 錄

第一章  前言 1
1.1 WCDMA技術發展 1
1.2 基帶成形濾波器設計方法的發展 1
1.3 本課題研究的意義、技術要求和主要內容 2
第二章  WCDMA概論 3
2.1 第三代移動通信系統的發展 3
2.1.1 概述 3
2.1.2 WCDMA移動通信系統 3
2.1.3 WCDMA的發展 4
2.1.4 我國第三代移動通信的研究情況 4
2.2 WCDMA技術特點 5
2.2.1 3G各種技術比較 5
2.2.2 WCDMA系統的技術特點 5
2.3 WCDMA的技術指標要求 7
第三章  基帶成形濾波器的關鍵技術 9
3.1 基帶成形技術 9
3.1.1 碼間干擾 9
3.1.2 碼間干擾的克服 9
3.1.3 基帶成型濾波器設計 10
3.2 數字濾波技術 11
3.2.1 數字濾波器概念 11
3.2.2 數字濾波器的分類 11
3.2.3 FIR濾波器的結構 12
3.2.4 FIR濾波器的設計方法 17
第四章  在WCDMA中基帶成形濾波器的MATLAB實現 25
4.1 MATLAB簡介 25
4.2 設計的基本步驟 25
4.3 性能指標 26
4.4 窗函數設計法 27
4.4.1 程序及仿真圖 27
4.4.2 小結 28
4.5 雙線性變換法 28
4.5.1 程序及仿真圖 28
4.5.2 小結 29
4.6 基于升余弦法直接設計FIR數字濾波器 29
4.7 FDATOOL的實現 30
4.8 本章小結 36
結 論 37
致 謝 38
參考文獻 39