基于LABVIEW的濕度測量儀設計

測控論文編號:CK112   論文字數:12835,頁數:37

 目  錄
 摘要 II
 1緒論………………………………………………………………………………….1
選題的背景及意義…………………………………………………………………….1
濕度傳感器簡介……………………………………………………………………….1
濕度傳感器的特性………………………………………………………….2
HTG3515CH線性電壓濕度模塊…………………………………………..3
虛擬儀器與LABVIEW介紹………………………………………………………….5
 2 測試系統的硬件部分簡述…………………………………………………………………….10
系統總體構成………………………………………………………………………....10
硬件模塊設計………………………………………………………………………....11
 3 測試系統的軟件設計………………………………………………………………………….12
軟件設計的總體思路與結構…………………………………………………………12
各功能模塊的程序設計………………………………………………………………13
初始化模塊………………………………………………………………...13
濕度采集模塊……………………………………………………………...14
程序自檢模塊…………………………………………………………………………17
儲存模塊………………………………………………………………………………18
時間顯示………………………………………………………………………………19
完整程序………………………………………………………………………………20
 4測試系統的調試………………………………………………………………………………..23
硬件的安裝調試………………………………………………………………………23
軟件的調試……………………………………………………………………………23
數據采集卡的任務配置…………………………………………………...23
開始程序……………………………………………………………………25
任務的選取……………………………………………………………………………25
程序的調試……………………………………………………………………………26
程序的改進……………………………………………………………………………28
 5 總結…………………………………………………………………………………………….29
 致謝……………………………………………………………………………………………….30
 參考文獻………………………………………………………………………………………….31
 附錄……………………………………………………………………………………………….32

摘  要
 本文的主題是“基于LabVIEW技術濕度測量儀的設計，主要闡述了濕度虛擬測量的設計過程和測試。此測試系統所用的是NI公司的USB-6009采集卡，是基于LabVIEW8.5 平臺編程設計的。它具備如下功能：濕度檢測、標準輸出、建立濕度與時間關系曲線、濕度監測報警（可調上下限）以及信號輸出、數據儲存。文章對上述的功能模塊進行了逐一分析，并進行了整個測試系統的程序調試與研究。本測試系統對環境溫濕度無要求。
 關鍵詞：  濕度傳感器；NI數據采集卡；LabVIEW語言；濕度測量
 
 Abstract
 In this paper, the theme is " The Design of Virtual Humidity Instrument By LabVIEW".It mainly describes in high temperature the humidity virtual meauring syetem design process and testing. This meauring system is used in the company's  USB-6009 NI data acquisition card. It is a programming design wich is based on the LabVIEW8.5 express platform. It is equipped with the following features : humidity corresponding detection,standard output,the establishment of humidity and time cure,humidity monitoring and alarm(adjustable minimum and maximum levels)and signal output,data storage. In this paper the functions of each module above and the entire test system for program debugging and research is analysed. The test system of environmental temperature and humidity did not ask for.
KEYWORDS： Humidity sensor;NI data acquisition card;LabVIEW language;Humidity measurement